mqtt_push.tc¶
mqtt_push.tc — sends meter values as a JSON of your own to an MQTT topic of
// @name: MQTT-Push
// @info: https://ottelo9.github.io/tasmota-sml-script/sml/#mqttpush
// @order: 32
// mqtt_push.tc — sends meter values as a JSON of your own to an MQTT topic of
// your own, e.g. the grid power to a go-e charger for PV surplus charging
// (tasmota-sml-images issue #67). Runs in its own slot next to the SML
// program and reads the meter straight from the SML driver, so the SML
// program stays as it is and devices without it pay no RAM.
// Docs: https://ottelo9.github.io/tasmota-sml-script/sml/#mqttpush
//
// /mqtt_push.cfg, one KEY= per line, // comments allowed:
// TOPIC= where to publish
// JSON= the payload; %sml1% .. %sml6% = values 1..6 of the meter descriptor,
// %-sml1% .. %-sml6% the same with the sign turned
// EVERY= seconds between two messages (default 5)
// SMOOTH= smoothing in seconds (0 = off); about the average of that time
// The file is read again every 60 s, so a change needs no restart.
char sml_vers[] = "20.10.2026 17:55"; // build.html: version in the .tcb header and index.json
byte mp_topic[130];
byte mp_tpl[264]; // 255 chars + room to look 7 ahead for "%-smlN%"
int mp_every;
int mp_smooth;
float mp_v[7]; // 1..6, smoothed when SMOOTH > 1
int mp_seed; // 0 = take the next values as they are
int mp_cnt; // seconds since the last message
int mp_load; // seconds to the next read of the file
int mp_res; // 0 never sent, 1 ok, 2 failed
int mp_code;
int mp_hms; // hhmmss of the last attempt
// Value of "\nKEY=" (key at a line start) up to the line end, spaces trimmed.
// s starts with a '\n', so the first line counts too and "// KEY=" does not.
void mpVal(byte d[], byte s[], int p, int max) {
d[0] = 0;
if (p < 0) return;
p = p + 1;
while (s[p] != '=') p = p + 1;
p = p + 1;
while (s[p] == ' ') p = p + 1;
int i = 0;
while (s[p] != 0 && s[p] != '\n' && s[p] != '\r' && i < max - 1) {
d[i] = s[p];
i = i + 1;
p = p + 1;
}
while (i > 0 && d[i - 1] == ' ') i = i - 1;
d[i] = 0;
}
void mpLoad() {
byte cfg[700]; byte t[12];
mp_topic[0] = 0; mp_tpl[0] = 0; mp_every = 5; mp_smooth = 0;
int f = fileOpen("/mqtt_push.cfg", 0);
if (f < 0) return;
int k = fileRead(f, cfg, 698);
fileClose(f);
if (k < 0) k = 0;
// a '\n' in front: "\nKEY=" then finds the key on the first line too
int i = k;
while (i > 0) { cfg[i] = cfg[i - 1]; i = i - 1; }
cfg[0] = '\n';
cfg[k + 1] = 0;
mpVal(mp_topic, cfg, strFind(cfg, "\nTOPIC="), 129);
mpVal(mp_tpl, cfg, strFind(cfg, "\nJSON="), 256);
mpVal(t, cfg, strFind(cfg, "\nEVERY="), 12);
if (t[0] != 0) mp_every = strToInt(t);
mpVal(t, cfg, strFind(cfg, "\nSMOOTH="), 12);
if (t[0] != 0) mp_smooth = strToInt(t);
if (mp_every < 1) mp_every = 1;
if (mp_smooth < 0) mp_smooth = 0;
}
// Number without trailing zeros: 230.000 -> 230, 12.340 -> 12.34
void mpNum(byte d[], float v) {
sprintf(d, "%.3f", v);
int i = strlen(d) - 1;
while (i > 0 && d[i] == '0') { d[i] = 0; i = i - 1; }
if (i > 0 && d[i] == '.') d[i] = 0;
if (strcmp(d, "-0") == 0) strcpy(d, "0");
}
// mp_tpl with %sml1%..%sml6% replaced, %-sml1% = with the sign turned (the
// SML programs need the descriptor's sign, so it cannot be turned there).
// Copied char by char: a '%' in a sprintf format would be eaten.
void mpBuild(byte out[]) {
byte nb[24];
int i = 0; int o = 0;
while (mp_tpl[i] != 0 && o < 500) {
int m = 0;
if (mp_tpl[i] == '%' && mp_tpl[i + 1] == '-') m = 1;
if (mp_tpl[i] == '%' && mp_tpl[i + m + 1] == 's' && mp_tpl[i + m + 2] == 'm' && mp_tpl[i + m + 3] == 'l'
&& mp_tpl[i + m + 4] >= '1' && mp_tpl[i + m + 4] <= '6' && mp_tpl[i + m + 5] == '%') {
float v = mp_v[mp_tpl[i + m + 4] - '0'];
if (m == 1) v = 0.0 - v;
mpNum(nb, v);
int j = 0;
while (nb[j] != 0 && o < 500) { out[o] = nb[j]; o = o + 1; j = j + 1; }
i = i + m + 6;
} else {
out[o] = mp_tpl[i];
o = o + 1;
i = i + 1;
}
}
out[o] = 0;
}
void EverySecond() {
if (mp_load <= 0) { mpLoad(); mp_load = 60; }
mp_load = mp_load - 1;
int n = smlGet(0); // values in the descriptor, 0 = no meter
if (n > 6) n = 6;
int i;
for (i = 1; i <= n; i = i + 1) {
float x = smlGet(i);
if (mp_smooth > 1 && mp_seed == 1) mp_v[i] = mp_v[i] + (x - mp_v[i]) / mp_smooth;
else mp_v[i] = x;
}
if (n > 0) mp_seed = 1;
mp_cnt = mp_cnt + 1;
if (mp_cnt < mp_every) return;
mp_cnt = 0;
mp_hms = tasm_hour * 10000 + tasm_minute * 100 + tasm_second;
int e = 0;
if (mp_topic[0] == 0 || mp_tpl[0] == 0) e = -11;
else if (n == 0) e = -3;
else {
byte out[512];
mpBuild(out);
e = mqttPublish(mp_topic, out, 0); // 0 = no console line every few seconds
}
if (e == 0) mp_res = 1;
else { mp_res = 2; mp_code = e; }
}
void WebCall() {
byte c[200]; byte b[12];
if (mp_res == 1) strcpy(b, "#0c0");
else if (mp_res == 2) strcpy(b, "#e00");
else strcpy(b, "#888");
if (mp_res == 0) {
sprintf(c, "{s}MQTT-Push <span style='color:%s'>●</span> -", b);
} else {
sprintf(c, "{s}MQTT-Push <span style='color:%s'>●</span> <span style='font-weight:normal;font-size:.85em'>🕒 %02d:%02d:%02d</span>", b, mp_hms / 10000, (mp_hms / 100) % 100, mp_hms % 100);
}
if (mp_res == 2) {
sprintf(b, " (%d)", mp_code);
strcat(c, b);
}
strcat(c, "{m}<a href='/ufse?file=/mqtt_push.cfg'>mqtt_push.cfg</a>{e}");
webSend(c);
}
int main() {
addLog("mqttpush: start %s", sml_vers);
return 0;
}